잠수할 수 있는 진공 공기는 격막 펌프 70M 최대 머리 135L/Min를 운영했습니다

잠수할 수 있는 진공 공기는 두 배 격막 펌프 135L/Min를 운영했습니다

그 격막 펌프를 (또한 막 펌프, 공기에 의하여 운영한 두 배 격막 펌프 (AOOD) 또는 압축 공기를 넣은 격막 펌프로 아십시오) 액체를 양수하는 용도 보답 고무의, 열가소성 또는 teflondiaphragm 및 적당한 벨브의 조합의 활동 격막 (역행 방지판, 나비 벨브, 플랩 벨브, 또는 다른 어떤 차단 밸브의 모양)의 측 바람쐬십시오.

운영한 두 배 격막 펌프 묘사를 바람쐬십시오:

공기에 의하여 운영하는 두 배 격막 펌프 주요 이점

1, 공군력의 사용, 자동적으로 수출 저항에 따라 바뀌는 교류 때문에. 높은 점성 액체를 위해 적당한 지 어느 것이.
2개는, 가연성물질과 폭발성 환경에서, 펌프 믿을 수 있고 저가는, 불꽃과 과열을 아닙니다 일으키지 않을 것입니다,
3개는, 펌프 양 작고, 기초 필요로 한 움직이기, 쉽습니다 편리한 임명 및 경제. 이동할 수 있는 운반은으로 펌프 사용될 수 있습니다.
위험이 있는 곳에 4개는, 부식성 물자 가공의 격막 펌프 외부에 완전하게 분리될 수 있습니다.
5개는 불안정한 화학 액체 운반을 위해 매체에, 펌프 전단력 낮은, 육체적인 효력 작습니다, 사용될 수 있습니다 입니다.

50 x x - X X x - X (모형 선택)

관 입의 형성하십시오: A-BSP B-NPT (F) C 플랜지  

격막 물자: 9 – Santoprene H – Hytrel T - PTFE/Santoprene  

공 물자: 9 - Santoprene H – Hytre T – PTFE A - 아세탈  

공 좌석 물자: P/K – 폴리프로필렌/Kynoar SS – 스테인리스  

펌프 물자: SS – 스테인리스 알루미늄 – 알루미늄 합금 CI- 탄소 강철 P/K – 폴리프로필렌/Kynoar

최대 적용되는 온도 한계 (격막/공/물개 물자)  

아세탈 ···············································40° - 150°F (4.4 - 65.5°C)  

Santoprene························································································- 40° - 225°F (- 40° - 107.2°C) 테플론··································································································40° - 220°F (4.4° - 104°C) 니트릴···································································································10° - 180°F (- 12° - 82°C) Viton································································································- 40° - 350°F (- 40°-176.6°C) Hytrel···································································································- 20°-150°F (- 12° - 93°C) Kynar································································································10°-200°F (- 28.9° - 65.5°C) 폴리프로필렌····························································································32° - 175°F (0-79.4°C)

2" 순서도